How to update IP-BOX???

1. There is one jumper in the IP BOX. Take out the jumper and connect to PIN1 and PIN2.

2. Connect your PC and IP BOX with twisted RS-232C cable (pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5).
   Note: Same cable as Update STB S/W.

3. Press the Reset Button on the IP-BOX.

4. Run the IPBOX-Upgrade.exe 

5. Click Set Port to set correct COM if needed, COM1 is default.

6. Click open to select the IP BOX update S/W.

7. Then Click Start to update. 
    In the Link Status, it will display "Deleting flash--->Sending main data -->Finish".

8. After Finishing downloading, take out the jumper to connect to PIN2 and PIN3.